P33CM 'PARECO' CARD RIBBED Acoustic Reflector for smart phone

ParaChirp Dodo is suited to the field where robustness and acoustic intergrity are required. The materials accommodate moisture and heat.  Parachirp can be disassembled but the number of cycles will be limited as wear may occur when unclipping and reclipping the parts. Hot glue can significantly increase strength but this is not deemed essential. The smartphone may be fitted to the phone plate with 'hair ties' or elastic bands which must be monitored and replaced when worn. We accept no liability for lost or damaged devices. Alternatively for Video use the smartphone may be mounted on a selfie stick which can be attached to PC. Alternatively the device may be carried on the person and either a wired mic fitted to PC or a Bluetooth device. This provides a number of configurations for security and protection of your device.

Should you be disatisfied with PC please contact us with an explanation and we'll see what we can do. Because PC is a self assembly device no guarentees can be made in terms of the quality of build. Occasionally the parts might have small areas that have not laser cut right through. Its normal to have to cut or fettle parts to remove from the frame or to fit together- you do NEED tight fitting parts to avoid squeaks etc from the material moving. If however you see that you have a sheet of material that has very poor cutting we will happily replace the faulty part if you can provide a photo of the problem area component.

This is essentially an educational product where the development benefits from participant feedback. You are welcome to modify the structure to suit your needs better and we ask that you share these details with us so we can develop the product for the benefit of potential users. Parachirp has a limited life expectancy which can be increased by careful use and keeping dry.

ParaChirp will arrive in a eco friendly Jiffy type bag.